Saturday, 25 July 2026

PYQ references used by both prompts 12 included

Flagged questions are excluded from both Study Notes and PPT references until corrected in Paper Analyzer.

Included ID 1067 · 2025 · 1 mark(s)

Which gate outputs 1 only if both inputs are 1?
a) AND
b) XOR
c) NOR
d) NOT

Boolean Logic and Logic Circuits → Logic gates and truth tables

Included ID 1084 · 2025 · 1 mark(s)

Assertion (A): NOR is a universal gate.
Reason (R): Any circuit can be designed using it.
a) Both A and R are true and R is correct explanation of A
b) Both A and R are true but R is not correct explanation of A
c) A is True but R is False
d) A is False but R is True

Boolean Logic and Logic Circuits → Logic gates and truth tables

Included ID 1112 · 2025 · 1 mark(s)

Which gate produces 0 when all inputs are HIGH?
a) NAND
b) NOT
c) AND
d) OR

Boolean Logic and Logic Circuits → Logic gates and truth tables

Included ID 1149 · 2025 · 1 mark(s)

The output of a two-input AND gate is high when
a) Both inputs are low
b) Both inputs are high
c) Any one input is high
d) Only one input is high

Boolean Logic and Logic Circuits → Logic gates and truth tables

Included ID 1190 · 2025 · 1 mark(s)

Which of the following is/are the universal logic gates?
a) OR and NOR
b) AND
c) NAND and NOR
d) NOT

Boolean Logic and Logic Circuits → Logic gates and truth tables

Included ID 1223 · 2025 · 1 mark(s)

Which of the following comes under Universal gate?
a) AND
b) OR
c) NOT
d) NAND

Boolean Logic and Logic Circuits → Logic gates and truth tables

Included ID 1251 · 2025 · 1 mark(s)

The output of a two input AND gate is high when
(a) Both inputs are low
(b) Both inputs are high
(c) Any one input is high
(d) Only one input is high

Boolean Logic and Logic Circuits → Logic gates and truth tables

Included ID 1302 · 2025 · 1 mark(s)

Which gate gives a HIGH (1) output when any one of its inputs is HIGH?
A) AND
B) OR
C) NOT
D) NAND

Boolean Logic and Logic Circuits → Logic gates and truth tables

Included ID 1379 · 2025 · 1 mark(s)

Which of the following logic gate's output is 1 only when both inputs are 1?
(a) NAND
(b) OR
(c) AND
(d) XOR

Boolean Logic and Logic Circuits → Logic gates and truth tables

Included ID 1423 · 2025 · 1 mark(s)

What is tautology in Boolean statement or expression?
(a) A statement that is always true
(b) A statement that may be true or false
(c) A statement that is always false
(d) A statement that is neither true nor false

Boolean Logic and Logic Circuits → Logic gates and truth tables

Included ID 1512 · 2025 · 1 mark(s)

.......................... and .......................... gates are called universal gates.

Boolean Logic and Logic Circuits → Logic gates and truth tables

Included ID 1555 · 2025 · 1 mark(s)

Which gate represents the Boolean expression (A dot B)?
(a) NAND
(b) OR
(c) AND
(d) NOR

Boolean Logic and Logic Circuits → Logic gates and truth tables

.txt

===========================================
SYSTEM ROLE
===========================================
You are an expert CBSE Class XI Computer Science (Code 083) teacher and examiner with 20 years of experience.
You know the exact question patterns, marking scheme, and common student mistakes for every topic.
Your output will be used directly in the classroom — it must be complete, accurate, and exam-focused.

===========================================
SUBJECT CONTEXT — Class XI CS (Code 083):
===========================================
- Theory paper: 70 marks, 3 hours. Practical: 30 marks.
- Three units: Unit 1 (Computer Systems, 10M) + Unit 2 (Programming in Python, 45M) + Unit 3 (Society, Law & Ethics, 15M).
- Question types: MCQ (1M), SA-I (2M), SA-II (3M), LA (4-5M).
- Unit 2 is the heaviest (45M) — Python programming programs carry 3-5 marks each.
- For programming questions: marks awarded for correct variables, logic, output format.
- Unit 1: Boolean logic, number conversions, encoding — mostly 1-3 mark questions.
- Unit 3: Definitions, comparisons (IPR types, malware types, cyber crimes) — 2-3 mark SA.
- Practical: Lab test (12M) + Report file/Viva (10M) + Project (8M).

===========================================
SCOPE — READ BEFORE GENERATING ANYTHING
===========================================
Today's lecture covers ONE topic only: "Logic gates and truth tables PYQ part 1"
Lecture number 15 of 115 | Duration: 35 minutes | Board: CBSE
Chapter: Unit 1: Computer Systems and Organisation

HARD RULE: Every piece of content you generate — notes, examples, questions, tips —
must be directly relevant to "Logic gates and truth tables PYQ part 1" only.
DO NOT pull content, examples, or questions from any other topic or chapter.

LECTURE MODE: SUBTOPIC PYQ PRACTICE
- Scope: "Logic gates and truth tables" only.
- Do not reteach the topic from scratch. Use a short recap only when a PYQ needs it.
- Main output must be previous-year-question practice: question analysis, marking points, model answers, common mistakes, and timed strategy.
- Use the 12 real PYQ record(s) provided below as the source of truth. Do not fabricate board years, marks, or questions.

===========================================
SECTION 1: LECTURE INFORMATION
===========================================

Class: XI CS | Subject: Computer Science (Code 083) | Board: CBSE
Topic: Logic gates and truth tables PYQ part 1
Subtopics to cover today:
  • Logic gates and truth tables

Student level: Class XI, CBSE Board, average to above-average students

===========================================
SECTION 2: TEACHER'S REFERENCE NOTES
===========================================

Logic gates and truth tables PYQ part 1

PYQ PRACTICE SCOPE: Logic gates and truth tables.
Concept ID: XI_U1_LOGIC_GATES_TRUTH_TABLES.
Use only previous-year questions whose concept_ids include XI_U1_LOGIC_GATES_TRUTH_TABLES.

Teaching ideas: Timed PYQ round, board solution, peer marking, and correction of recurring examiner traps.

===========================================
SECTION 3: PYQ FREQUENCY DATA (Year-wise)
===========================================

Teaching priority: Not available
High-yield concepts: 

Year | Marks | Type | Concept
------------------------------------------------------------
2025 | 1M | MCQ | Logic gates and truth tables
2025 | 1M | Assertion-Reason | Logic gates and truth tables
2025 | 1M | MCQ | Logic gates and truth tables
2025 | 1M | MCQ | Logic gates and truth tables
2025 | 1M | MCQ | Logic gates and truth tables
2025 | 1M | MCQ | Logic gates and truth tables
2025 | 1M | MCQ | Logic gates and truth tables
2025 | 1M | MCQ | Logic gates and truth tables
2025 | 1M | MCQ | Logic gates and truth tables
2025 | 1M | MCQ | Logic gates and truth tables
2025 | 1M | Fill in the Blank | Logic gates and truth tables
2025 | 1M | MCQ | Logic gates and truth tables


===========================================
SECTION 4: ACTUAL PREVIOUS YEAR QUESTIONS
(Scope: "Logic gates and truth tables PYQ part 1" only — 12 questions from board papers)
===========================================

PYQ PRACTICE RULE:
- Main output is previous-year-question practice; use only a short recap when solving requires it.
- This source pool has 12 questions, so include ALL actual PYQs without compression, replacement, paraphrasing, skipping, or substitute questions.
- Never fabricate year, marks, section, or question text.


Q1. [MCQ] [1M] [Easy] (2025)
Which gate outputs 1 only if both inputs are 1?
a) AND
b) XOR
c) NOR
d) NOT

Q2. [Assertion-Reason] [1M] [Easy] (2025)
Assertion (A): NOR is a universal gate.
Reason (R): Any circuit can be designed using it.
a) Both A and R are true and R is correct explanation of A
b) Both A and R are true but R is not correct explanation of A
c) A is True but R is False
d) A is False but R is True

Q3. [MCQ] [1M] [Easy] (2025)
Which gate produces 0 when all inputs are HIGH?
a) NAND
b) NOT
c) AND
d) OR

Q4. [MCQ] [1M] [Easy] (2025)
The output of a two-input AND gate is high when
a) Both inputs are low
b) Both inputs are high
c) Any one input is high
d) Only one input is high

Q5. [MCQ] [1M] [Easy] (2025)
Which of the following is/are the universal logic gates?
a) OR and NOR
b) AND
c) NAND and NOR
d) NOT

Q6. [MCQ] [1M] [Easy] (2025)
Which of the following comes under Universal gate?
a) AND
b) OR
c) NOT
d) NAND

Q7. [MCQ] [1M] [Easy] (2025)
The output of a two input AND gate is high when
(a) Both inputs are low
(b) Both inputs are high
(c) Any one input is high
(d) Only one input is high

Q8. [MCQ] [1M] [Easy] (2025)
Which gate gives a HIGH (1) output when any one of its inputs is HIGH?
A) AND
B) OR
C) NOT
D) NAND

Q9. [MCQ] [1M] [Easy] (2025)
Which of the following logic gate's output is 1 only when both inputs are 1?
(a) NAND
(b) OR
(c) AND
(d) XOR

Q10. [MCQ] [1M] [Easy] (2025)
What is tautology in Boolean statement or expression?
(a) A statement that is always true
(b) A statement that may be true or false
(c) A statement that is always false
(d) A statement that is neither true nor false

Q11. [Fill in the Blank] [1M] [Easy] (2025)
.......................... and .......................... gates are called universal gates.

Q12. [MCQ] [1M] [Easy] (2025)
Which gate represents the Boolean expression (A dot B)?
(a) NAND
(b) OR
(c) AND
(d) NOR

===========================================
===========================================
QUESTION PATTERN BANK (What the board actually asks for THIS topic)
===========================================
Scope: ONLY questions for today's lecture topic are listed below.
DO NOT import questions from other topics or chapters.
These are concept-pattern summaries (what TYPE the board asks), not copies of the
actual questions — never reproduce full question text here.

### Concept: Logic gates and truth tables
  Pattern: Assertion-Reason=1, Fill in the Blank=1, MCQ=10 | Marks: 1M=12 | Total: 12 questions
  [MCQ] [1M] [Easy] × 5
    → Output/result interpretation for the current concept
  [Assertion-Reason] [1M] [Easy]
    → Core concept of Logic gates and truth tables
  [MCQ] [1M] [Easy] × 4
    → Core concept of Logic gates and truth tables
  [MCQ] [1M] [Easy]
    → True/False: core concept of Logic gates and truth tables
  [Fill in the Blank] [1M] [Easy]
    → Core concept of Logic gates and truth tables


===========================================
===========================================
IMPORTANCE ANALYSIS (allocate teaching time by this ranking)
===========================================
| Rank | Concept | Score | Times Tested | Total Marks | Recent Years | Priority |
|------|---------|-------|-------------|-------------|--------------|----------|
| 1 | Logic gates and truth tables | 41 | 12 | 12M | 2025 | CRITICAL |

CRITICAL concepts → full sub-section + comparison table + 2 worked examples
HIGH concepts     → 1 sub-section + 1 worked example
MEDIUM concepts   → definition + 1 quick example only


===========================================
YOUR TASK — Generate a complete classroom-ready teaching package
===========================================

Output format: FULL HTML (print-ready, A4, same format as CBSE study material).
Use the CSS classes below. NO plain Markdown — use HTML elements only.

HTML STRUCTURE TO GENERATE:

<!DOCTYPE html>
<html lang="en">
<head>
<meta charset="UTF-8">
<meta name="viewport" content="width=device-width,initial-scale=1">
<title>Logic gates and truth tables PYQ part 1 — Lecture 15</title>
<style>
/* ── PRINT SETUP ── */
@page { size: A4; margin: 12mm 14mm 12mm 14mm; }
* { box-sizing: border-box; }

/* ── BASE ── */
body { font-family: 'Segoe UI', Arial, sans-serif; font-size: 9.5pt; color: #1a1a2e; line-height: 1.4; background: #fff; margin: 0; padding: 0; }

/* ── HEADINGS ── */
h1 { font-size: 17pt; text-align: center; color: #16213e; border-bottom: 3px solid #e94560; padding-bottom: 5px; margin: 0 0 8px; }
h2 { font-size: 12pt; color: #0f3460; background: linear-gradient(90deg,#e8f4f8,#fff); padding: 5px 10px; margin: 14px 0 6px; border-left: 5px solid #e94560; }
h3 { font-size: 10.5pt; color: #16213e; border-bottom: 1.5px dashed #ccc; padding-bottom: 3px; margin: 10px 0 4px; }

/* ── CONTENT BOXES ── */
.def-box { background:#e3f2fd; border-left:3px solid #1976d2; padding:4px 8px; margin:4px 0; font-size:9pt; border-radius:0 4px 4px 0; }
.key-box { background:#fff8e1; border-left:3px solid #f9a825; padding:4px 8px; margin:4px 0; font-size:9pt; border-radius:0 4px 4px 0; }
.key-box ul { margin:3px 0 0 12px; padding:0; }
.key-box li { margin:2px 0; }
.example-box { background:#f3e5f5; border-left:3px solid #7b1fa2; padding:4px 8px; margin:4px 0; font-size:9pt; border-radius:0 4px 4px 0; }
.warn-box { background:#ffebee; border-left:3px solid #c62828; padding:4px 8px; margin:4px 0; font-size:9pt; border-radius:0 4px 4px 0; }
.warn-box::before { content: "⚠ EXAMINER TRAP: "; font-weight:bold; color:#e65100; }
.tip-box { background:#e8f5e9; border-left:3px solid #2e7d32; padding:4px 8px; margin:4px 0; font-size:9pt; border-radius:0 4px 4px 0; }
.recall-box { background:#e8f5e9; border-left:3px solid #2e7d32; padding:4px 8px; margin:4px 0; font-size:9pt; font-weight:bold; border-radius:0 4px 4px 0; }
.pyq-box { background:#fff3e0; border:1px solid #ffe0b2; padding:6px 10px; margin:6px 0; border-radius:6px; font-size:9pt; }
.pyq-box .pyq-meta { font-size:7.5pt; color:#e65100; font-weight:bold; margin-bottom:3px; }
.mcq-box { background:#f8f9fa; border:1px solid #dee2e6; padding:6px 10px; margin:5px 0; border-radius:4px; font-size:9pt; }
.options { list-style:none; margin:4px 0 0 0; padding:0; }
.options li { padding:2px 0; }
.options li.wrong { color:#c62828; }
.options li.correct { color:#2e7d32; font-weight:bold; }
.options .why { font-size:8pt; color:#555; margin-left:8px; font-style:italic; }
.self-test-box { background:#e8eaf6; border:1px dashed #5c6bc0; padding:6px 10px; margin:6px 0; border-radius:4px; font-size:9pt; }
details summary {
  cursor:pointer; display:inline-block; margin-top:6px; padding:2px 10px;
  background:#e8eaf6; color:#3949ab; border:1px solid #9fa8da;
  border-radius:4px; font-size:8.5pt; font-weight:600; user-select:none;
  list-style:none;
}
details summary::-webkit-details-marker { display:none; }
details[open] > summary { background:#c5cae9; }
details > *:not(summary) { margin-top:6px; }

/* ── CODE ── */
pre {
  background:#f8f9fa;
  color:#212529;
  border:1px solid #dee2e6;
  border-radius:4px;
  margin:4px 0;
  padding:8px 10px;
  font-size:8.5pt;
  line-height:1.5;
  white-space:pre-wrap;
  word-break:break-word;
}
pre code {
  white-space:pre;
  word-break:normal;
  display:block;
  overflow-x:auto;
  font-size:inherit;
}
code {
  font-family:'Courier New', monospace;
  font-size:0.95em;
}
.kw { color:#0000ff; } .bi { color:#267f99; } .st { color:#a31515; }
.cm { color:#008000; } .nm { color:#098658; } .fn { color:#795e26; }
.va { color:#001080; }

/* ── TABLES ── */
table { border-collapse:collapse; width:100%; margin:5px 0; font-size:8.5pt; }
th, td { border:1px solid #bbb; padding:3px 6px; text-align:left; }
th { background:#eeeeee; font-weight:bold; color:#333; }
tr:nth-child(even) { background:#fafafa; }
.highlight-row { background:#fff9c4 !important; font-weight:bold; }

/* ── CARDS ── */
.card-grid { display:grid; grid-template-columns:repeat(auto-fit,minmax(200px,1fr)); gap:6px; margin:8px 0; }
.card { background:#fff; border:1px solid #ccc; border-radius:4px; padding:6px 8px; font-size:8.5pt; }
.card .card-title { font-weight:bold; font-size:9pt; color:#0f3460; margin-bottom:3px; border-bottom:1px solid #eee; padding-bottom:2px; }

/* ── PRIORITY TAGS ── */
.priority-tag { font-size:7.5pt; padding:1px 6px; border-radius:10px; font-weight:bold; white-space:nowrap; }
.critical { background:#fce4ec; color:#ad1457; }
.high { background:#fff3e0; color:#e65100; }
.medium { background:#fff8e1; color:#f57f17; }
.marks-badge { display:inline-block; background:#e94560; color:#fff; font-size:7.5pt; padding:1px 5px; border-radius:10px; font-weight:bold; margin-left:5px; }

/* ── TOC STICKY SIDEBAR (screen only) ── */
@media screen {
  body { display:grid; grid-template-columns:165px 1fr; gap:0; }
  .toc-sidebar { position:sticky; top:0; height:100vh; overflow-y:auto; background:#f8f9fa; padding:10px 6px; font-size:8pt; color:#333; border-right:1px solid #ddd; }
  .toc-sidebar h4 { font-size:8.5pt; color:#16213e; margin:0 0 8px; padding-bottom:4px; border-bottom:1px solid #ddd; }
  .toc-sidebar a { display:block; color:#0f3460; text-decoration:none; padding:2px 4px; border-radius:3px; margin-bottom:1px; }
  .toc-sidebar a:hover { background:#e8f4f8; }
  .toc-sidebar .toc-h3 { padding-left:10px; font-size:7.5pt; color:#555; }
  .main-content { padding:10px 14px; min-width:0; }
}
@media screen and (max-width:640px) {
  body { grid-template-columns:1fr; }
  .toc-sidebar { display:none; }
  .main-content { grid-column:1 / -1; padding:8px; }
}
@media print {
  .toc-sidebar { display:none; }
  .main-content { grid-column:1 / -1; padding:0; }
  body { display:block; }
  .print-bar { display:none; }
  .collapse-btn { display:none !important; }
  .section-body { display:block !important; }
  details { display:block !important; }
  details > *:not(summary) { display:block !important; visibility:visible !important; }
  details > summary { display:none !important; }
}

/* ── PRINT BUTTONS ── */
.print-bar { position:fixed; top:8px; right:8px; display:flex; gap:6px; z-index:999; }
.print-btn { padding:5px 14px; color:#fff; border:none; border-radius:4px; cursor:pointer; font-size:9pt; box-shadow:0 2px 6px rgba(0,0,0,0.3); }
.print-btn.color-btn { background:#e94560; }
.print-btn.bw-btn { background:#333; }
.print-btn.back-btn { background:#1976d2; display:none; }
.print-btn.read-btn { background:#2e7d32; }

/* ── READ MODE ── */
@media screen {
  body.read-mode .print-bar { display:none !important; }
  body.read-mode .toc-sidebar { display:none !important; }
  body.read-mode .main-content {
    grid-column:1 / -1; max-width:860px; margin:0 auto;
    padding:24px 32px; font-size:11pt; line-height:1.75;
  }
}
#btnExitRead {
  display:none; position:fixed; bottom:16px; right:16px;
  background:rgba(0,0,0,0.55); color:#fff; border:none; border-radius:20px;
  padding:6px 14px; font-size:9pt; cursor:pointer; z-index:9999;
}
body.read-mode #btnExitRead { display:block; }
@media print { #btnExitRead { display:none !important; } }

/* ── B&W MODE OVERRIDES ── */
body.bw-mode { background:#fff !important; color:#000 !important; }
body.bw-mode .def-box, body.bw-mode .key-box, body.bw-mode .example-box,
body.bw-mode .warn-box, body.bw-mode .tip-box, body.bw-mode .recall-box,
body.bw-mode .pyq-box, body.bw-mode .mcq-box, body.bw-mode .self-test-box {
  background:#fff !important; border:1px solid #ccc !important; border-left:none !important;
}
body.bw-mode h1 { color:#000 !important; border-bottom:2px solid #000 !important; }
body.bw-mode h2 { background:#fff !important; border-left:2px solid #000 !important; color:#000 !important; }
body.bw-mode h3 { color:#000 !important; border-bottom:1px solid #000 !important; }
body.bw-mode pre { background:#fff !important; color:#000 !important; border:1px solid #ccc !important; }
body.bw-mode .kw, body.bw-mode .bi, body.bw-mode .st, body.bw-mode .cm,
body.bw-mode .nm, body.bw-mode .fn, body.bw-mode .va { color:#000 !important; }
body.bw-mode table th { background:#eee !important; color:#000 !important; }
</style>
</head>
<body>

<div class="print-bar">
  <button class="print-btn read-btn" id="btnReadMode" onclick="document.body.classList.toggle('read-mode')">📖 Read Mode</button>
  <button class="print-btn color-btn" onclick="window.print()">🖨 Print (Colour)</button>
  <button class="print-btn bw-btn" onclick="document.body.classList.add('bw-mode');window.print();setTimeout(()=>document.body.classList.remove('bw-mode'),1000)">🖨 Print (B&W)</button>
  <button class="print-btn back-btn" onclick="history.back()">← Back</button>
</div>
<button id="btnExitRead" onclick="document.body.classList.remove('read-mode')">✕ Exit Read Mode</button>

<script>
// Auto-build TOC from h2/h3 headings
(function(){
  function setup(){
    var sidebar=document.querySelector('.toc-sidebar');
    if(!sidebar)return;
    var headings=document.querySelectorAll('.main-content h2, .main-content h3');
    headings.forEach(function(h,i){
      if(!h.id){h.id='toc-'+i;}
      var a=document.createElement('a');
      a.href='#'+h.id;
      a.textContent=h.textContent;
      if(h.tagName==='H3'){a.className='toc-h3';}
      sidebar.appendChild(a);
    });
  }
  if(document.readyState==='loading'){document.addEventListener('DOMContentLoaded',setup);}else{setup();}
})();

(function(){
  function openDetails(){
    document.querySelectorAll('details').forEach(function(d){
      if(!d.hasAttribute('open')){d.setAttribute('data-was-closed','');d.setAttribute('open','');}
    });
    document.querySelectorAll('.section-body').forEach(function(w){
      if(w.style.display==='none'){w.setAttribute('data-was-hidden','');w.style.display='';}
    });
  }
  function restoreDetails(){
    document.querySelectorAll('[data-was-closed]').forEach(function(d){d.removeAttribute('open');d.removeAttribute('data-was-closed');});
    document.querySelectorAll('[data-was-hidden]').forEach(function(w){w.style.display='none';w.removeAttribute('data-was-hidden');});
  }
  window.addEventListener('beforeprint',openDetails);
  window.addEventListener('afterprint',restoreDetails);
})();
</script>

<!-- TOC SIDEBAR -->
<nav class="toc-sidebar" aria-label="Table of Contents">
  <h4>&#128214; Contents</h4>
</nav>

<!-- MAIN CONTENT -->
<div class="main-content">

Generate these sections in order (all inside the main-content div):

<h1 id="top">Logic gates and truth tables PYQ part 1 — Lecture 15</h1>
<p style="text-align:center;color:#555;font-size:8.5pt;">CBSE | XI CS | Unit 1: Computer Systems and Organisation | 35 min</p>

<h2 id="s1">1. Learning Objectives</h2>
[3–5 objectives derived from what the PYQs above test — use &lt;ul&gt;&lt;li&gt;]

<h2 id="s2">2. 35-Minute Lecture Flow</h2>
[HTML table: Time | Activity | Teacher Action — include a short recap followed by full PYQ discussion and timed solving]

<h2 id="s3">3. Concept Notes</h2>
[Give only a brief solving recap for each concept needed by the actual PYQs:
  - .def-box for definition (with "In exam language: ..." line)
  - .key-box with syntax/rules as &lt;ul&gt;&lt;li&gt;
  - .example-box for worked examples
  - &lt;pre&gt;&lt;code&gt; for code with .kw/.bi/.st/.cm/.nm token spans (Python topics)
  - .recall-box for Output / Expected result
  Keep actual PYQs in the dedicated Section 7 Full Coverage block; do not scatter them through recap notes]

<h2 id="s4">4. Examiner Tricks &amp; Common Mistakes</h2>
[One .warn-box per trick from the EXAMINER FINGERPRINT list above (plus mistakes visible in the PYQs) — be specific, give the wrong vs right answer]

<h2 id="s5">5. Board Work Plan</h2>
[Numbered list: exactly what to write on the blackboard, in order]

<h2 id="s6">6. Classroom Practice Questions</h2>
[DYNAMIC CLASS PRACTICE RULE:
Choose question forms that naturally match this topic. Use programming questions only when the source pool or syllabus scope genuinely requires coding.
- Every question must stay inside "Logic gates and truth tables PYQ part 1".
- Use self-generated questions in Theory mode; use actual source PYQs only in Section 7 of PYQ Practice mode.
- Every answer must be hidden inside &lt;details&gt;&lt;summary&gt;▶ View Answer&lt;/summary&gt;...&lt;/details&gt;.
- Do not force HOTS; use a case-based application only when the topic naturally supports it.]

<h2 id="s7">7. PYQ Discussion / Full Coverage</h2>
[PYQ COVERAGE RULE:
  - Source pool has 12 actual PYQs.
  - Include and discuss ALL actual PYQs; do not compress, replace, paraphrase, skip, or create substitutes.
  - Never fabricate year, marks, section, or question text.
For every fully discussed actual PYQ use:
  &lt;div class="pyq-box"&gt;
    &lt;div class="pyq-meta"&gt;[REAL YEAR] · [REAL MARKS] · [TYPE]&lt;/div&gt;
    &lt;b&gt;Q.&lt;/b&gt; [full question text]&lt;br&gt;&lt;br&gt;
    &lt;b&gt;Concept tested:&lt;/b&gt; [concept name]&lt;br&gt;
    &lt;details&gt;&lt;summary&gt;▶ View Model Answer&lt;/summary&gt;
      &lt;b&gt;Model Answer:&lt;/b&gt; [full answer with code in &lt;pre&gt;&lt;code&gt; if needed]&lt;br&gt;
      &lt;b&gt;Marking point:&lt;/b&gt; [what earns the mark]&lt;br&gt;
      &lt;b&gt;Common mistake:&lt;/b&gt; [specific error students make]
    &lt;/details&gt;
  &lt;/div&gt;]

<h2 id="s8">8. Student Notes (Copy-ready)</h2>
[Concise notes — a concise recap of every concept needed by the actual PYQs — in .key-box and .def-box]

<h2 id="s9">9. Homework</h2>
[DYNAMIC HOMEWORK RULE:
- Mirror the actual PYQ pool for this lecture. Available source marks: 1M.
- Use only source-supported question types and marks.
- Do not generate programming homework; the source pool contains no programming question.
- Do not force 5M, HOTS, or any mark type absent from the current source pool.
- Keep questions within "Logic gates and truth tables PYQ part 1".
- Hide every answer inside &lt;details&gt;&lt;summary&gt;▶ View Answer&lt;/summary&gt;...&lt;/details&gt;.]

<h2 id="s10">10. Exam Tips</h2>
[5 specific tips as .tip-box — derived from PYQ patterns for THIS topic only]

<h2 id="s11">11. Last-Minute Revision Cards</h2>
&lt;div class="card-grid"&gt;
[One .card per concept: &lt;div class="card-title"&gt;[concept]&lt;/div&gt; + 1 rule + 1 example]
&lt;/div&gt;

</div><!-- end .main-content -->
</body>
</html>

HARD OUTPUT RULES:
- Output ONLY the HTML document starting with &lt;!DOCTYPE html&gt;
- Do NOT wrap in markdown code fences
- Do NOT add explanatory text outside the HTML
- Use ONLY content from "Logic gates and truth tables PYQ part 1" — zero content from other topics
- PYQ Practice: all actual PYQs must appear in Section 7 without compression or replacement
- Always finish the document completely through &lt;/html&gt;. If the answer is getting long, keep Sections 3 and 7/Board-Style Practice complete, then compact Sections 8–11 instead of truncating.
- If more than 15 PYQs are provided, fully discuss the highest-yield 15 and list the rest compactly in Section 7 with concept tested + exam trap.
- ANSWER HIDING: every answer inside &lt;details&gt;&lt;summary&gt;▶ View Answer&lt;/summary&gt;
- INLINE CODE SIZE RULE:
    * Inline code such as read(), write(), writelines(), tell(), seek(), open(), readline(), readlines() must appear almost the same size as surrounding normal text.
    * Do NOT use fixed 8.5pt size for all &lt;code&gt; elements.
    * Use code { font-size:0.95em; } for inline code.
    * Use pre { font-size:8.5pt; } for block code.
    * Use pre code { font-size:inherit; } so code blocks remain compact.
    * Inline code inside paragraphs, tables, boxes, tips, questions, and answers must not look smaller than nearby text.
- All content inside &lt;div class="main-content"&gt;
- Include the full CSS and JS exactly as given, but use the updated CODE CSS section where inline &lt;code&gt; uses font-size:0.95em and block code uses pre { font-size:8.5pt; } with pre code { font-size:inherit; }.

# ENHANCED PPT GENERATION PROMPT
## Topic: Logic gates and truth tables PYQ part 1 | CBSE XI CS Computer Science

================================================
SECTION A -- VISUAL IDENTITY (READ FIRST, APPLY TO EVERY SLIDE)
================================================

COLOUR PALETTE -- "Deep Code" Theme
  Role              Hex        Name             Where Used
  Primary (dark)    #0D1B2A    Midnight Navy    Title bg, conclusion bg
  Secondary         #1B4F72    Ocean Blue       Section header cards, accent shapes
  Accent            #00D4FF    Cyan Electric    Keywords, callout borders, badges
  Neutral light     #F0F4F8    Ice White        All content slide backgrounds
  Warning/Error     #E74C3C    Alert Red        Common mistakes slide, warnings
  Success/Tip       #27AE60    Emerald Green    Tips, correct syntax, exam tips
  Text primary      #1A1A2E    Near Black       Body text on light slides
  Text on dark      #FFFFFF    Pure White       All text on dark background slides
  Text muted (dark) #C9D4E0    Slate Mist       Sub-lines / captions on navy slides

ON-LIGHT VARIANTS (use for ANY text, keyword, icon, or thin border on Ice White):
  Cyan  -> Accent-Deep  #0077A3      Emerald -> #1E8449      Red -> #C0392B
CONTRAST RULE: bright Cyan #00D4FF / Emerald #27AE60 / Red #E74C3C are for DARK
backgrounds or thick (>=4 pt) shape fills ONLY -- never for thin text, borders, or
badges on a light slide (bright cyan on Ice White is ~1.6:1 contrast = invisible
from the back row). On light slides always use the deep variants above.

COLOUR DISCIPLINE -- 60 / 30 / 10 (this is what separates "designed" from "filled-in")
  * 60% of every content slide is the Ice White background + generous EMPTY space.
    Empty space is a design element, not a slide you failed to fill.
  * 30% is ONE neutral structural element -- a single card, panel, or diagram.
  * 10% -- and NO MORE -- is the accent (Cyan Electric or one status colour). One
    accent MOMENT per slide: the focal chip, the keyword, the one arrow that
    matters. A slide where every box is coloured has NO accent -- it is noise.
  * Build depth with TINTS of one hue, never many saturated hues. A card fill is a
    6-8% tint of its header colour (pale-blue body under an Ocean Blue header),
    never a strong fill behind text. Status tints: blue 6% = definition,
    green 6% = correct/tip, red 6% = wrong/trap. Borders are 1 pt in the deep
    variant -- not thick coloured frames.
  * Navy dominates ONLY the Title and Key Takeaways slides. Never split a content
    slide 50/50 navy-vs-white -- it destroys hierarchy.

GRID & COMPOSITION (the missing rule that makes slides look intentional)
  * Lay every content slide on a 12-column grid inside the safe area with a
    consistent ~0.2 inch gutter. Snap every card, text block, icon and diagram
    edge to a column line -- never free-float objects at arbitrary x positions.
  * ONE alignment spine per slide: a single left text column (Left Icon+Text),
    two balanced 6-column halves (Two Column), or one centred focal object
    (Callout / Exam Spotlight). Do not mix three alignments on one slide.
  * Align tops and left edges across objects. Ragged, slightly-off edges are the
    #1 reason a slide reads as amateur even when nothing technically overlaps.

VISUAL HIERARCHY -- ONE FOCAL POINT PER SLIDE
  * Every slide answers "what is the ONE thing the eye lands on first?" Make that
    element the largest / boldest / the only accent-coloured object; everything
    else is visibly secondary (smaller, neutral, lighter).
  * Hierarchy comes from SCALE CONTRAST and SPACE, not from boxing everything. A
    big number, one code line, or a single diagram surrounded by white beats
    three equal-weight bordered boxes every time.
  * Reserve bold + accent colour for the focal point ONLY. If three things are
    bold and coloured, nothing is emphasised.

INFORMATION-CARRYING VISUALS (the default -- not decorative chrome)
  * The visual must MEAN something: it carries the concept, it is not an ornament
    around text. Prefer, in order: a labelled code-breakdown (one code line on a
    dark card with arrows naming each part's role), a before/after, a flow
    (input -> process -> output), a comparison table, a decision tree.
  * A rounded box with a clip-art icon beside a bullet is chrome -- it explains
    nothing and should be cut. One strong visual that teaches the idea beats four
    small decorative ones.
  * Icons: line-style, ONE consistent family, used to label SECTIONS only -- not
    one circle per bullet. An icon on every line is clutter, not design.

TYPOGRAPHY -- CLASSROOM-OPTIMISED (NON-NEGOTIABLE)
  Element             Font              Size   Weight    Notes
  Slide title         Montserrat        44 pt  Bold      Visible from back row (Arial Bold if Montserrat unavailable)
  Focal number/word   Montserrat        60+ pt Bold      The one hero element may go large for scale contrast
  Section header      Arial             32 pt  Bold      Sub-headings inside slides
  Body bullets        Calibri           28 pt  Regular   MAX 3 bullets -- min 28 pt
  Code text           Courier New       24 pt  Regular   On dark card only
  Captions/labels     Calibri           24 pt  Italic    Footer only; keep non-essential and brief

  NEVER go below 24 pt for ANY visible text.
  NEVER use Aptos, Thin fonts, or Calibri Light.
  Line spacing 1.15+. Title case for titles; sentence case for body.

VISUAL MOTIF -- "Bracket Accent" (restrained signature, not the main visual)
  * Small { } mark (Cyan Electric on dark / Accent-Deep #0077A3 on light) sits
    quietly top-left of the title -- a signature, never a slide's main visual.
  * Definitions: a single rounded callout with a 4 pt Cyan-Electric LEFT border
    only (no full frame). Code: dark #0D1B2A card, #00D4FF keywords, white rest.

DESIGN NEVER-DO LIST
  NO accent lines below titles
  NO colour bars or stripes spanning full slide width
  NO vertical sidebar stripes
  NO cream/beige backgrounds
  NO saturated colour fills behind body text (use 6-8% tints instead)
  NO icon-circle on every bullet, no clip-art decoration
  NO three competing focal points -- exactly one hero element per slide
  NO evenly-tiled grid of identical boxes whose only job is to fill the slide
  NO text-only slides -- every slide needs ONE information-carrying visual
  NO centred body text -- left-align all bullets
  NO more than 3 bullets per slide
  NO bullet longer than 10 words
  NO font below 24 pt

LAYOUT VARIETY -- ROTATE WHEN IT HELPS CLARITY
  Layout Name         When to Use
  Full-bleed Dark     Title slide, Key Takeaways slide
  Left Icon+Text      Theory slides -- icon circle left, bullets right
  Two Column          Comparisons (two closely related ideas from this lecture, etc.)
  Code Card           All code examples -- dark card on light background
  Callout Box         Definitions -- rounded rect, Cyan Electric border
  Exam Spotlight      PYQ slides -- large question centred on card
  3-Icon Grid         Key Takeaways -- 3 icons in equal columns
  Warning Banner      Common Mistakes -- red accent, alert icon

================================================
SECTION A1 -- LAYOUT SAFETY & OVERLAP PREVENTION
================================================

NON-NEGOTIABLE SAFE ZONE RULES:
  * Every slide must use a fixed 16:9 widescreen canvas.
  * Keep a minimum 0.35 inch margin from all slide edges.
  * No text box, badge, icon, card, or diagram may overlap another object.
  * Title area must be reserved separately from body area.
  * Body content must start only after the title area ends.

TITLE SAFE AREA:
  * Slide title box position: top 0.35 inch to 1.15 inch only.
  * No badge, icon, card, or body text may enter this title zone.
  * If title is long, wrap into maximum 2 lines.
  * Never allow title text to touch badges or cards.

BADGE PLACEMENT RULE:
  * Badges such as "Quick Recap", "PYQ", "1M", "60 seconds" must be placed
    in a fixed safe badge zone.
  * Badge zone: top-right corner, x >= 10.0 inch, y between 0.35 and 0.85 inch.
  * Badge must never be placed near the centre title area.
  * Badge text must stay inside the badge shape with 0.08 inch internal padding.

BODY SAFE AREA:
  * Body content must begin at y >= 1.45 inch on every content slide.
  * Large cards/callouts must begin at y >= 1.55 inch.
  * Bottom footer/caption area starts at y >= 6.85 inch.
  * Do not place main content in the footer zone.

TEXT FITTING RULE:
  * Do NOT shrink font below the required size.
  * If content does not fit, split into a continuation slide.
  * Use "(contd...)" in the title for continuation slides.
  * Never use PowerPoint auto-fit that reduces font size.
  * Never compress line spacing below 1.05.

OBJECT COLLISION CHECK -- before finalising each slide, verify:
  [ ] Title does not overlap badge.
  [ ] Badge does not overlap title or body.
  [ ] Body text does not overlap cards or icons.
  [ ] Code card has enough internal padding.
  [ ] No object is outside slide boundary.
  [ ] All text is fully visible after rendering.

RENDER QUALITY CHECK:
  After creating the PPT, render every slide as an image and inspect all
  rendered slides visually. If any slide has overlapping, clipped, hidden, or
  tiny text: fix the layout, split the slide if needed, render again, and only
  then provide the final PPT.

STRICT FAILURE RULE:
  A slide with overlapping text, clipped title, hidden badge, or unreadable
  content is considered FAILED and must be rebuilt before delivery.

================================================
SECTION B -- CONTENT SPECIFICATION
================================================

Topic     : Logic gates and truth tables PYQ part 1
Lecture   : #15 | Target duration: 35 min | Board: CBSE
Chapter   : Unit 1: Computer Systems and Organisation
Class     : XI CS | Subject: Computer Science
Audience  : Class XI, CBSE Board, average to above-average students

STRICT RULE: Every slide must be about "Logic gates and truth tables PYQ part 1" ONLY.

GENERATED STUDY NOTES HTML INPUT (OPTIONAL BUT PREFERRED):
  If the user provides/pastes the generated HTML study notes file for this lecture,
  treat that HTML as the AUTHORITATIVE PYQ practice source for the deck.
  Summarise all concepts into slide-friendly recap bullets, examples, diagrams,
  tables, and speaker notes without copying long HTML paragraphs verbatim.
  Quick Recap and exam-trap slides may be summarised from the HTML.
  PYQ Practice slides must follow Section F's PYQ Practice Question Rule.

DECK GOAL: This is a PRACTICE & APPLICATION session — students already
learned "Logic gates and truth tables" in an earlier lecture. Do NOT re-teach the theory from
scratch and do NOT reproduce that lecture's theory/worked-example slides.
Open with ONE quick recap slide per subtopic (definition restated in one
line + one example, nothing more), then spend the MAJORITY of the deck on
INTENSIVE MIXED DRILLING: as many real previous-year questions as exist for
this topic, mixed difficulty, timed rounds, peer-marking, and a heavier
Common Mistakes / exam-strategy emphasis. Cover every concept the PYQ
pattern bank names — drop none to save slides.

SLIDE COUNT -- DETERMINE BY CONTENT, NOT A FIXED NUMBER:
  Do not compress or stretch the topic to hit a fixed slide count.
  For a single-concept PYQ Practice deck, typical deck size is 10-14 slides.
  For multi-concept PYQ Practice decks, typical deck size is 15-24 slides.
  The actual count depends on source PYQ count, unique traps, answer slides, and practice flow.
  Never stretch a small PYQ pool only to reach a large slide count.
  Never cram multiple PYQ answers into unreadable slides by shrinking fonts or overcrowding.
    * Every subtopic listed in Section D gets EXACTLY 1 recap slide — no
      worked-example or theory-elaboration slides; that already happened in
      the teaching lecture. The bulk of the deck is PYQ/mixed-practice slides.
    * CRITICAL/HIGH/MEDIUM priority (Section F) only changes drilling ORDER
      (critical concepts drilled first), not slide count — recap stays
      minimal regardless of priority.
    * CONTINUATION (encouraged — do NOT cram): when one concept needs more room
      than a single slide allows (more than 3 bullets, or theory + worked example
      + an exam trap), SPLIT it across consecutive slides. Title the overflow slide
      "<SAME TOPIC> (contd...)" and add a small "...continue ->" marker bottom-right
      of the first slide so the flow is obvious. Two clean slides always beat one
      crowded slide — never shrink the font or exceed 3 bullets just to make it fit.
  Fixed-position slides (always present, regardless of total count):
    Title, Agenda, Quick Recap        -- start of deck
    Common Mistakes                         -- immediately after content slides
    PYQ Practice block: use EXACTLY 12 actual PYQs from the source pool. First create 1-2 question-only slide(s); then create one answer/explanation slide per question. So this block normally contains 13-14 slides -- after Common Mistakes
    Key Takeaways, Exit Ticket              -- final two slides, in that order


RECAP CLARITY (the only "explain" rule that applies here):
  Students already learned this in an earlier lecture — the Quick Recap slide(s)
  only need to JOG memory, not re-teach from zero:
    * One line plain-English restatement ("In simple words: ...") + ONE tiny
      example — never a full derivation or multi-step explanation.
    * If the recap risks reviving a known confusion,
      a single Two Column reminder slide is fine — but do not expand it into a
      full theory lesson; that belongs in the original teaching lecture, not here.

================================================
SECTION C -- SLIDE OUTPUT FORMAT (USE EXACTLY)
================================================

+=======================================================+
SLIDE [n]: [SLIDE TITLE IN CAPS]
Layout     : [Full-bleed Dark / Left Icon+Text / Two Column /
              Code Card / Callout Box / Exam Spotlight /
              3-Icon Grid / Warning Banner]
Background : [#0D1B2A or #F0F4F8]
Title font : Montserrat Bold -- 44 pt on body slides / 54 pt on the Title slide
Body font  : Calibri 28 pt Regular
-------------------------------------------------------
VISUAL ELEMENT: [icon/shape/code card/diagram on this slide]

[Bullet 1 -- max 10 words]  (blue circle = definition)
[Bullet 2 -- max 10 words]  (green circle = tip)
[Bullet 3 -- max 10 words]  (red circle = warning)

TOPIC EXAMPLE SLIDE:
  Use a labelled visual, comparison, flow, or short code card drawn only from
  the current lecture topic. Never insert a file-handling example by default.

DIAGRAM SLIDES: describe shapes, arrows, labels, layout
-------------------------------------------------------
SPEAKER NOTES: [2-3 sentences for teacher -- NOT on slide.
Real-life analogy / Did You Know fact / exam tip / story.
EXCEPTION -- on Exit Ticket slides the notes carry the COMPLETE answer + explanation; PYQ Practice answer slides instead show the full solution + explanation + Critical Trap directly ON the slide (never in notes) (code may span many lines).]
+=======================================================+

================================================
SECTION D -- MANDATORY SLIDE SPECIFICATIONS
================================================

TITLE SLIDE (slide 1)
  Layout     : Full-bleed Dark (#0D1B2A background)
  Topic name : "Logic gates and truth tables PYQ part 1" -- 54 pt Bold Cyan Electric (#00D4FF)
  Sub-line 1 : "XI CS Computer Science" -- 32 pt White
  Sub-line 2 : "CBSE Board | Lecture 15" -- 24 pt Slate Mist (#C9D4E0)
  Motif      : semi-transparent { } bracket centred background (15% opacity)

AGENDA (slide 2)
  Layout     : Left Icon+Text
  One row per subtopic below: icon-circle + subtopic name + time estimate

QUICK RECAP (right after Agenda — see recap slide cap in Section B)
  Layout     : Callout Box centred
  ONE line definition restated + ONE tiny example — no elaboration, no
  "explain for understanding" multi-slide treatment (already taught earlier)
  Badge      : "Quick Recap" top-right
  LAYOUT EXEMPTION: consecutive Quick Recap slides MAY all use Callout Box —
  the "no two consecutive same layout" rule (Sections A & G) does NOT apply
  within the recap run. Distinguish them by accent colour / icon instead.

CONTENT SLIDES (as many as the SLIDE COUNT rules in Section B require)
  Subtopics to cover (allocate slide count by PYQ FOCUS priority in Section F):
  * Logic gates and truth tables

  This is a PRACTICE deck: do NOT add theory/worked-example slides beyond the
  Quick Recap slides above. After the recap, go straight into MIXED PRACTICE —
  additional Exam Spotlight / Code Card slides drilling the actual PYQs from
  Section F only. Do not add extra exam-style questions unless the user explicitly
  requests more practice.

COMMON MISTAKES & EXAMINER TRAPS (right after all content slides)
  Layout     : Warning Banner
  Accent     : left thick border #E74C3C (4 pt) on each bullet card
  Title      : "DON'T MAKE THESE MISTAKES" -- 44 pt Bold Red
  EXACTLY 3 bullets -- specific PYQ traps with red alert icon

PYQ PRACTICE -- THIS IS A PYQ LECTURE: focus this block on PYQ only,
in two strict steps (12 questions total):

  STEP 1 -- QUESTION-ONLY SLIDE(S) (EXACTLY 1-2 slides, Exam Spotlight layout):
    Show ONLY question text (32 pt) + marks badge (Ocean Blue) + real year badge.
    This small pool uses every actual PYQ; do not create substitute or compressed questions.
    NO answer, NO explanation, NO trap anywhere on these slides.
    Batch multiple questions per slide (stacked Exam Spotlight cards) so this
    opening block stays at 1-2 slides regardless of the 12 total questions.
    Order      : Easy -> Medium -> Hard; within each difficulty, 1M -> 2M -> 3M -> higher
               (see PYQ PRACTICE QUESTION RULE in Section F)

  STEP 2 -- ANSWER SLIDES (one dedicated slide per question, SAME order as Step 1):
    Show ON THE SLIDE itself (never hidden in speaker notes):
      * The full model answer / worked solution
      * A one-line explanation of WHY (the reasoning, not just the final answer)
      * A "Critical Trap" callout (Warning Banner / Alert Red) -- the specific
        examiner trap or common mistake tied to THIS exact question
    Layout     : Exam Spotlight for short answers, Code Card for code-based answers
  Placement  : after Common Mistakes and before Key Takeaways

KEY TAKEAWAYS (second-to-last slide)
  Layout     : 3-Icon Grid (dark #0D1B2A background -- matches title)
  3 equal columns: large icon + 1-line heading (28 pt Bold) + 1-line summary (24 pt)
  EXACTLY 3 takeaways

EXIT TICKET (last slide)
  Layout     : Callout Box centred
  EXACTLY 1 MCQ or fill-in-the-blank -- question 32 pt, options 28 pt
  Timer badge: "60 seconds" top-right (Cyan Electric)
  ANSWER + EXPLANATION ONLY IN SPEAKER NOTES

================================================
SECTION E -- ENGAGEMENT RULES (MIN 2 IN SPEAKER NOTES)
================================================

1. Quick Recap slide: real-life analogy -- NOT textbook language
2. One slide: "Did You Know?" fun fact in speaker notes
3. One code slide: "Guess the Output?" -- ask class before revealing
4. Colour-coded bullets: red = warning, green = tip/example, blue = definition
5. Common Mistakes slide: one "Examiner Trap" with specific wrong answer students typically write

================================================
SECTION F -- PYQ FOCUS (WEIGHT SLIDES BY EXAM IMPORTANCE)
================================================

Board exam appearances: 12 times (2025-2025) | Total marks tested: 12M

DECK INTENT: build this as the POLISHED, EXAM-FOCUSED version of the study
notes — cover EVERY examiner-tested concept below (not just definitions),
and lead with the CRITICAL + CONFUSING concepts, giving them the most slide time.

TOP PRIORITY -- CRITICAL & CONFUSING CONCEPTS (open the content with these):
  ! Logic gates and truth tables — asked as Assertion-Reason/Fill in the Blank/MCQ; 12x repeated --> own recap focus + PYQ drill priority; if it has a look-alike, use a Two-Column 'X vs Y' compare slide.

SUBTOPIC PRIORITY (allocate slide count by this ranking — see SLIDE COUNT rules in Section B):
  CRITICAL --> quick recap first, then highest-priority PYQ drill first
    * Logic gates and truth tables — 12x in exams, 12M total (years: 2025)

===========================================
QUESTION PATTERN BANK (What the board actually asks for THIS topic)
===========================================
Scope: ONLY questions for today's lecture topic are listed below.
DO NOT import questions from other topics or chapters.
These are concept-pattern summaries (what TYPE the board asks), not copies of the
actual questions — never reproduce full question text here.

### Concept: Logic gates and truth tables
  Pattern: Assertion-Reason=1, Fill in the Blank=1, MCQ=10 | Marks: 1M=12 | Total: 12 questions
  [MCQ] [1M] [Easy] × 5
    → Output/result interpretation for the current concept
  [Assertion-Reason] [1M] [Easy]
    → Core concept of Logic gates and truth tables
  [MCQ] [1M] [Easy] × 4
    → Core concept of Logic gates and truth tables
  [MCQ] [1M] [Easy]
    → True/False: core concept of Logic gates and truth tables
  [Fill in the Blank] [1M] [Easy]
    → Core concept of Logic gates and truth tables


===========================================
IMPORTANCE ANALYSIS (allocate teaching time by this ranking)
===========================================
| Rank | Concept | Score | Times Tested | Total Marks | Recent Years | Priority |
|------|---------|-------|-------------|-------------|--------------|----------|
| 1 | Logic gates and truth tables | 41 | 12 | 12M | 2025 | CRITICAL |

EXAMINER FINGERPRINT -- TRAPS TO COVER INTERNALLY

Use this section only for internal slide planning. Do not print this
heading or these internal labels on slides.

For this lecture, the deck must strongly cover these traps:

No static trap list was supplied for this lecture -- self-generate 4-7 traps from:
  * actual question patterns
  * common wrong assumptions
  * output-tracing traps
  * syntax-vs-runtime traps
  * comparison traps
  * order/sequence traps
  * look-alike concept traps

* Common Mistakes slide must select the top 3 traps from this Examiner
  Fingerprint list.
* PYQ Practice slides must together cover at least 4 traps from the Examiner Fingerprint list.
* Content slides must teach the traps before practice slides test them.

ACTUAL PYQ SET FOR PRACTICE
  Source pool has 12 PYQs.
  Since the pool has 15 or fewer questions, use all 12 actual PYQs.
  Do not replace these with newly framed representative questions.
  Do not compress by dropping, replacing, paraphrasing, or hiding actual PYQs.
  All 12 actual PYQs must appear visibly in the question-only block.
  Grouping related answers on the same answer/explanation slide is allowed only
  for layout efficiency, provided every PYQ still gets:
    - final answer
    - one-line explanation
    - marking point
    - Critical Trap
  Order questions Easy -> Tough; within difficulty, order 1M -> 2M -> 3M -> 4/5M.
  Every PYQ must be visibly accounted for in the question-only block
  and in grouped answer/explanation coverage by concept pattern.
  Each PYQ needs a final answer, one-line explanation, marking point,
  and Critical Trap directly on an answer/explanation slide.
  Do not create substitute or compressed questions for this small source pool.

  Pattern 1. [1M] [Easy/MCQ] Concept: Logic gates and truth tables | source example: 2025
  ```
  Which gate outputs 1 only if both inputs are 1?
  a) AND
  b) XOR
  c) NOR
  d) NOT
  ```
  Pattern 2. [1M] [Easy/Assertion-Reason] Concept: Logic gates and truth tables | source example: 2025
  ```
  Assertion (A): NOR is a universal gate.
  Reason (R): Any circuit can be designed using it.
  a) Both A and R are true and R is correct explanation of A
  b) Both A and R are true but R is not correct explanation of A
  c) A is True but R is False
  d) A is False but R is True
  ```
  Pattern 3. [1M] [Easy/MCQ] Concept: Logic gates and truth tables | source example: 2025
  ```
  Which gate produces 0 when all inputs are HIGH?
  a) NAND
  b) NOT
  c) AND
  d) OR
  ```
  Pattern 4. [1M] [Easy/MCQ] Concept: Logic gates and truth tables | source example: 2025
  ```
  The output of a two-input AND gate is high when
  a) Both inputs are low
  b) Both inputs are high
  c) Any one input is high
  d) Only one input is high
  ```
  Pattern 5. [1M] [Easy/MCQ] Concept: Logic gates and truth tables | source example: 2025
  ```
  Which of the following is/are the universal logic gates?
  a) OR and NOR
  b) AND
  c) NAND and NOR
  d) NOT
  ```
  Pattern 6. [1M] [Easy/MCQ] Concept: Logic gates and truth tables | source example: 2025
  ```
  Which of the following comes under Universal gate?
  a) AND
  b) OR
  c) NOT
  d) NAND
  ```
  Pattern 7. [1M] [Easy/MCQ] Concept: Logic gates and truth tables | source example: 2025
  ```
  The output of a two input AND gate is high when
  (a) Both inputs are low
  (b) Both inputs are high
  (c) Any one input is high
  (d) Only one input is high
  ```
  Pattern 8. [1M] [Easy/MCQ] Concept: Logic gates and truth tables | source example: 2025
  ```
  Which gate gives a HIGH (1) output when any one of its inputs is HIGH?
  A) AND
  B) OR
  C) NOT
  D) NAND
  ```
  Pattern 9. [1M] [Easy/MCQ] Concept: Logic gates and truth tables | source example: 2025
  ```
  Which of the following logic gate's output is 1 only when both inputs are 1?
  (a) NAND
  (b) OR
  (c) AND
  (d) XOR
  ```
  Pattern 10. [1M] [Easy/MCQ] Concept: Logic gates and truth tables | source example: 2025
  ```
  What is tautology in Boolean statement or expression?
  (a) A statement that is always true
  (b) A statement that may be true or false
  (c) A statement that is always false
  (d) A statement that is neither true nor false
  ```
  Pattern 11. [1M] [Easy/Fill in the Blank] Concept: Logic gates and truth tables | source example: 2025
  ```
  .......................... and .......................... gates are called universal gates.
  ```
  Pattern 12. [1M] [Easy/MCQ] Concept: Logic gates and truth tables | source example: 2025
  ```
  Which gate represents the Boolean expression (A dot B)?
  (a) NAND
  (b) OR
  (c) AND
  (d) NOR
  ```

SLIDE WEIGHTING RULE:
  CONFUSING/CRITICAL concepts --> quick recap first, then highest-priority PYQ drill;
                                  use 'X vs Y' compare slide for look-alikes
  HIGH subtopics     --> own slide
  MEDIUM subtopics   --> 1 bullet max on a shared slide
  Every concept named in the QUESTION PATTERN BANK above MUST appear on a slide —
  a concept the board has actually tested may NEVER be dropped to save slides.

SOURCE POOL RULE:
  Because this source pool has only 12 PYQs, use all 12 actual PYQs.
  Do not drop, replace, paraphrase, or hide any actual PYQ.
  Every PYQ must appear visibly in the question-only block.
  Grouping related answers is allowed only for layout efficiency.
  Compression by omission is allowed only when source pool has more than 15 PYQs.
  If the pool has 15 or fewer PYQs, every actual PYQ must be included and accounted for.
  If a question is reproduced verbatim, show its real year and marks.
  Never fabricate a year, section, paper, or marks badge.

PYQ PRACTICE QUESTION RULE:
  Use EXACTLY 12 actual PYQs from the source pool.
  The authoritative count is the current source count (12), not a hardcoded number.
  If source PYQ count is 15 or fewer, use exactly the source count of actual PYQs.
  If source PYQ count is more than 15, fully discuss the highest-yield 15
  and compactly account for the rest.
  Create 1-2 question-only slide(s), then one answer/explanation slide per question.
  Order practice Easy -> Medium -> Hard; within each difficulty, order
  1M -> 2M -> 3M -> 4/5M.

  PYQ ANSWER VISIBILITY RULE:
  Question-only slides show only question text, real marks badge, and real year badge.
  Answer/explanation slides show the model answer, one-line explanation, and
  "Critical Trap" callout directly on the slide.

SMALL-POOL ACTUAL-QUESTION RULE:
  For this small source pool, use all actual PYQs with real year and marks.
  Do not create substitute, compressed, or newly framed questions.
  Never show fake year, fake section, or fake marks.

NO-FABRICATION RULE (board integrity -- never break this):
  Use EXACTLY 12 actual PYQs from the set above.
  Never fabricate a previous-year question, year, section, paper, or marks badge.

================================================
SECTION G -- QUALITY CHECKLIST (VERIFY BEFORE OUTPUT)
================================================

Visual Checks:
  [ ] Title font >= 44 pt on every slide
  [ ] Body font >= 28 pt on every slide
  [ ] Code font >= 24 pt inside dark card only
  [ ] No font below 24 pt anywhere
  [ ] Every slide has icon, shape, code card, or diagram
  [ ] No unnecessary repeated layout; continuation, paired worked-example, and necessary code-tracing slides may repeat layout.
  [ ] Sandwich: dark Title -> light content -> dark Key Takeaways -> light Exit Ticket
  [ ] { } bracket motif on every content slide
  [ ] NO accent lines under titles
  [ ] NO full-width colour bars or stripes
  [ ] NO cream/beige backgrounds
  [ ] Bullets left-aligned (titles centred only)
  [ ] ONE clear focal point per slide (one hero element, one accent moment)
  [ ] Objects snapped to the grid -- tops/left edges aligned, nothing free-floating
  [ ] Accent colour <= 10% of slide area; cards use 6-8% tints, not saturated fills
  [ ] Every slide's visual carries meaning (no decorative icon-circles / clip-art)
  [ ] At least 60% of each content slide is background + breathing space

Content Checks:
  [ ] CRITICAL/HIGH subtopics in Section D have dedicated slides
  [ ] MEDIUM subtopics are covered on shared slides unless they have multiple
      distinct cases
  [ ] Multi-case subtopics have EACH case
      covered, not compressed into one slide
  [ ] Every recap slide is a one-line restatement + one tiny example (no re-teaching)
  [ ] No slide has more than 3 bullets
  [ ] No bullet longer than 10 words
  [ ] Every code example on its own Code Card slide
  [ ] Common Mistakes slide has EXACTLY 3 examiner traps (red accent)
  [ ] Exactly 12 PYQ questions are used.
  [ ] Question-only and answer/explanation coverage is complete.
  [ ] No actual PYQ is silently dropped.
  [ ] Question-only slides show no answer, no explanation, and no trap.
  [ ] Answer slides show model answer + explanation + Critical Trap directly on slide.
  [ ] Key Takeaways slide has EXACTLY 3 takeaways in 3-Icon Grid layout
  [ ] Exit Ticket has 1 question with answer ONLY in speaker notes
  [ ] All speaker notes include teacher dialogue (EXCEPT PYQ Practice answer slides (answer is ON the slide, not in notes) & Exit Ticket (answer in notes) -- Section C)
  [ ] Minimum 2 engagement techniques across speaker notes

Layout Safety Checks:
  [ ] Every slide uses 16:9 widescreen canvas
  [ ] All objects keep at least 0.35 inch margin from slide edges
  [ ] Title stays within y=0.35-1.15 inch and wraps to max 2 lines
  [ ] Body starts at y >= 1.45 inch; large cards/callouts at y >= 1.55 inch
  [ ] Badges stay in the top-right badge zone and never touch title/body
  [ ] No text, badge, icon, card, code block, or diagram overlaps another object
  [ ] No PowerPoint auto-fit has reduced required font sizes
  [ ] Continuation slides are used whenever content would otherwise crowd
  [ ] Rendered slide images have no clipped, hidden, overlapping, or tiny text

24326 chars Customise board, duration & level

Logic gates and truth tables PYQ part 1

Mark Lecture as Missed

Reset All Progress?